Community Talk
Community Talk
Welcome to J-Net!
08.25.09

09.03.10
yogee95

Hi Guyzzzz,Good Morning Joined Jnet Forums Hope to have Good Xperience and learn lot of things from this Posts

10.28.10
thuan.nguyen1@navy.mil

How do I measure the roud trip delay on CTB 2056?

 

Below are the steps i did.

1. Serial 0/0 route to internet port in the back of CTB

2. Route the internet port in the back of CTB (same in step 1) to Serial 0/1 and set Serial 0/1 to loop: to NET configuration

3. Connect FireBerd 8000 to serial 0/0 (DB25)

The result I got for round trip delay is 80ms.

 

Would you please confirm the result is correct or not? if not, how much delay I should expect from serial to ip to serial on same CTB?

 

V/R

10.28.10
Administrator Administrator

Thuan-

 

Please post your question in J-Net Forums so that you can get a response from the Community. This blog is specfically for News Posts.

 

Thank you!

11.12.10
williams_yapu@hotmail.com

Hi everyone!

 

from now on i will be posting some comments and issues.

 

Regards from Bolivia!

12.01.10
sanjeevch

hi,

 

this is my first post in the learning of junos.. i m cisco certified. ..now planning to go for juniper certification. well the main reason to join this forum is to learn / share knowledge. hope to get good support from all other forum members. considering myself a beginer in juniper, i m planning to start with Day one booklets... ..take care.

 

Regards

 

Sanjeev

Top Kudoed Authors