I have 2 ISP links connected to the SRX.
ISP -1 on ge-0/0/2 interface
ISP -2 on ge-0/0/3 interface.
I want to have both the links to be Active-Active so that i have used filter based forwarding. Enable rpm probe to check ping 188.8.131.52 on each link.
failover occurs only when the ethernet cable is unplugged mannually.
Let me have any work around and am running 11.2 R2.
I am not sure if this post still holds , But pasting an update for reference in future :
The solution is provided in post : http://forums.juniper.net/t5/SRX-Services-Gateway/ip-monitoring-for-dual-isp-failover/td-p/267802