Configuration Library
Configuration Library

Failover without manual Intrevention

‎03-06-2012 04:39 AM

Dear Team,

 

I have 2 ISP links connected to the SRX.

   ISP -1 on ge-0/0/2 interface

  ISP -2  on ge-0/0/3 interface.

 

I want to have both the links to be Active-Active so that i have used filter based forwarding. Enable rpm probe to check ping 4.2.2.2 on each link.

 

failover occurs only when the ethernet cable is unplugged mannually.

 

Let me have any work around and am running 11.2 R2.

 

Regards,

AN

1 REPLY 1
Configuration Library

Re: Failover without manual Intrevention

‎07-10-2015 03:32 AM

Hello ,

 

I am not sure if this post still holds , But pasting an update for reference in future :

 

The solution is provided in post : http://forums.juniper.net/t5/SRX-Services-Gateway/ip-monitoring-for-dual-isp-failover/td-p/267802


Thanks,
Sam

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....