Configuration Library
Configuration Library

Martini L2circuit Juniper and Cisco

‎11-20-2015 02:04 AM

Hello,

 

I set up simple a topology that is on attachment. Edge routers ara cisco and remaining ones are juniper which is running mpls network. Cisco devices are customer devices and VLAN numbers are 300 which is connected to JUNIPER PEs.I configured virtual circuit id 300. And connection is up. But cisco are not pinging each other. What do you think about this issue? What is missing one?

 

You may contact with me discuss this via mail: mahmutaydin.ma@gmail.com.

 

Thank you for your help.

Attachments

2 REPLIES 2
Configuration Library

Re: Martini L2circuit Juniper and Cisco

‎11-20-2015 04:13 AM

It would help if you could post relevant configurations of both your Juniper PE and your Cisco CPE. 

Configuration Library

Re: Martini L2circuit Juniper and Cisco

‎11-23-2015 02:36 AM

Thank you for your help.

 

You may see my configuration file on attachment. I changed customer vlan as 600. 

Attachments