Contrail Platform Developers
Highlighted
Contrail Platform Developers

vMX configuration by Contrail

‎02-21-2018 11:12 PM

Can we configure vMX as a gateway with the device manager in Contrail?

I am using Contrail 3.2.8 and vMX 17.4 and put the configurations from the Contrail GUI,

while following the instrucutions. But I cannot not see any configurations in the vMX which

are added by the device manager.  

 

The reference is here.

https://www.juniper.net/documentation/en_US/contrail3.2/topics/concept/using-device-manager-netconf-...

 

There is a similar example but it seems to me that the vMX gateway is manually configured in advance.

https://forums.juniper.net/t5/Contrail-Platform-Developers/Contrail-Cloud-Lab-Example-vSRX-service-i...

2 REPLIES 2
Contrail Platform Developers
Solution
Accepted by topic author HiroshiD
‎10-03-2018 09:32 PM

Re: vMX configuration by Contrail

‎02-22-2018 02:44 AM

Hi

 

Yes, it should work. Make sure you have NETCONF enabled. When you enter Vendor and Model in Contrail GUI, make sure it is "Juniper" and "MX" (NOT "vMX").

 

Best Regards,
PK

Juniper Ambassador, Juniper Networks Certified Instructor,
JNCIE-SEC #98, JNCIE-ENT #393, JNCIE-SP #2253
Twitter: @JuniperTrain
GitHub: https://github.com/pklimai
[Juniper Authorized Education & Support in Russia]
Contrail Platform Developers

Re: vMX configuration by Contrail

‎02-26-2018 06:30 AM

Hi

 

Thank you for your support.

I used "Juniper" and "vmx" or "vMX".

 

So let me try with "Juniper" and "MX" later.