DX - Load Balancing & Application Acceleration
DX - Load Balancing & Application Acceleration

SA 2500 takes a very long time to start host checker.

‎01-29-2009 09:43 AM
 Up to 4-5 minutes wait time on 6 Mb cable connection.  Anyone experiencing this.  I can go to https://sslvpn.com  and get the certificate message immediately.  However, after choosing to continue host checker and cache cleaner take several minutes to load.  Anyone have any ideas?
DX - Load Balancing & Application Acceleration

Re: SA 2500 takes a very long time to start host checker.

‎01-30-2009 02:15 AM


This forum is for the DX device, the SA forum is http://forums.juniper.net/jnet/board?board.id=SSL_VPN, sorry but I do not not have the permissions to move your post to that forum.   Can you repost this question in the SA forum? I would suggest also supplying the code version the SA is running, the client OS and browser version of affected machines.  Have you tried unistalling the HC and re-installing the version from the SA?

I did a search of the SA forum and the following might be related:






It would be worthwhile also collecting UserAccess Logs from the IVE admin console and client-side logs for Host Checker:


Use the System > Log/Monitoring > Client Logs > Settings tab to enable clientside

logging for the Host Checker. When you enable this option, the IVE writes a

client-side log to any client that uses Host Checker.



Disable this after you have collected the logs.  


More details can be found at http://kb.juniper.net/KB9618;  http://kb.juniper.net/KB9630 and  https://download.juniper.net/software/ive/docs/supplemental/how-to/How_To_Host_Checker_Trouble_Shoot...




The Juniper Networks DX application acceleration platform delivers a complete data center acceleration solution for Web-enabled and IP-based business applications.

RSS Icon