Ethernet Switching
Highlighted
Ethernet Switching

Apply Groups for LAG interfaces

‎07-24-2015 03:10 AM

Hi,

 

i have around 30 LAG interfaces(ae interface)  all these vlans will be trunk port and have common vlans.

 

since interface range is not supported for LAG interfaces can i achieve grouping LAG interfaces apply vlan members for all LAG interfaces in one go.

 

is this possible with apply groups? if yes can you pleasee help me with configuration?

 

Regards,

Mahesh

 

 

2 REPLIES 2
Highlighted
Ethernet Switching
Solution
Accepted by topic author nmahesh
‎08-26-2015 01:27 AM

Re: Apply Groups for LAG interfaces

[ Edited ]
‎07-24-2015 08:09 AM

Hello,

 

Please try below:

 

set groups lag interfaces <ae*> unit 0 family ethernet-switching vlan members test-1000
set interfaces apply-groups lag

 

above group will apply vlan test-1000 to all AE/LAG interfaces

{master:0}[edit]
root@test# show interfaces ae1 | display inheritance
aggregated-ether-options {
    link-speed 1g;
    lacp {
        active;
    }
}
unit 0 {
    family ethernet-switching {
        interface-mode trunk;
        
        vlan {
            
            ## 'test-1000' was inherited from group 'lag'   >>> here we can see vlan test-1000 was inherited from group "lag"
            
            members [ test-1000 ];
        }
    }
}                                       

 

 

=======================================================

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too

Highlighted
Ethernet Switching

Re: Apply Groups for LAG interfaces

‎07-24-2015 08:33 AM

Kudos:)

 

Thanks.. it worked for me..

 

Since i had a mixture of L3 and L2 LAG interfaces, i had to apply groups for every individual L2 LAG  interface.

 

Feedback