Ethernet Switching
Highlighted
Ethernet Switching

BRCM_COS_HALP

‎06-06-2019 08:55 PM

Hi all,

The following logs have been occrrred on ex switches. Any ideas about it?

 

dc-pfe: BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
dc-pfe: BRCM_COS_HALP(brcm_cos_bind_drop_profile_queue:341): Failed to set discard setting for port 7 error: Feature unavailable
dc-pfe: BRCM_COS_HALP(brcm_cos_bind_drop_profile:645): Failed to bind drop profile 1 for ifd index 728
dc-pfe: BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
dc-pfe: BRCM_COS_HALP(brcm_cos_sched_bind_drop_profile:901): Drop profile 1 bind failed for ifd 728queue num 0
dc-pfe: BRCM_COS_HALP(brcm_ng_flat_hr_bind_sm_ifd:2770): Failed to bind DP to Queue 0 ifd 728
fpc0 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc0 BRCM_COS_HALP(brcm_cos_sched_unbind_drop_profile:934): Drop profile 1 bind failed for ifd 728queue num 0
fpc0 BRCM_COS_HALP(brcm_ng_flat_hr_unbind_sm_ifd:2914): Unit 0 Failed to bind DP to Queue 0 ifd 728
fpc0 BRCM_COS_HALP(brcm_cos_bind_drop_profile_queue:341): Failed to set discard setting for port 7 error: Feature unavailable
fpc0 BRCM_COS_HALP(brcm_cos_bind_drop_profile:645): Failed to bind drop profile 1 for ifd index 728
fpc0 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc0 BRCM_COS_HALP(brcm_cos_sched_bind_drop_profile:901): Drop profile 1 bind failed for ifd 728queue num 0
fpc0 BRCM_COS_HALP(brcm_ng_flat_hr_bind_sm_ifd:2770): Failed to bind DP to Queue 0 ifd 728
dc-pfe: BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
dc-pfe: BRCM_COS_HALP(brcm_cos_sched_unbind_drop_profile:934): Drop profile 1 bind failed for ifd 728queue num 0
dc-pfe: BRCM_COS_HALP(brcm_ng_flat_hr_unbind_sm_ifd:2914): Unit 0 Failed to bind DP to Queue 0 ifd 728
dc-pfe: BRCM_COS_HALP(brcm_cos_bind_drop_profile_queue:341): Failed to set discard setting for port 7 error: Feature unavailable
dc-pfe: BRCM_COS_HALP(brcm_cos_bind_drop_profile:645): Failed to bind drop profile 1 for ifd index 728
dc-pfe: BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
dc-pfe: BRCM_COS_HALP(brcm_cos_sched_bind_drop_profile:901): Drop profile 1 bind failed for ifd 728queue num 0
dc-pfe: BRCM_COS_HALP(brcm_ng_flat_hr_bind_sm_ifd:2770): Failed to bind DP to Queue 0 ifd 728
fpc0 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc0 BRCM_COS_HALP(brcm_cos_sched_unbind_drop_profile:934): Drop profile 1 bind failed for ifd 728queue num 0
fpc0 BRCM_COS_HALP(brcm_ng_flat_hr_unbind_sm_ifd:2914): Unit 0 Failed to bind DP to Queue 0 ifd 728
fpc0 BRCM_COS_HALP(brcm_cos_bind_drop_profile_queue:341): Failed to set discard setting for port 7 error: Feature unavailable
fpc0 BRCM_COS_HALP(brcm_cos_bind_drop_profile:645): Failed to bind drop profile 1 for ifd index 728
fpc0 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc0 BRCM_COS_HALP(brcm_cos_sched_bind_drop_profile:901): Drop profile 1 bind failed for ifd 728queue num 0
fpc0 BRCM_COS_HALP(brcm_ng_flat_hr_bind_sm_ifd:2770): Failed to bind DP to Queue 0 ifd 728

fpc1 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc1 BRCM_COS_HALP(brcm_cos_sched_unbind_drop_profile:934): Drop profile 1 bind failed for ifd 783queue num 0
fpc1 BRCM_COS_HALP(brcm_ng_flat_hr_unbind_sm_ifd:2914): Unit 0 Failed to bind DP to Queue 0 ifd 783
fpc1 BRCM_COS_HALP(brcm_cos_bind_drop_profile_queue:341): Failed to set discard setting for port 7 error: Feature unavailable
fpc1 BRCM_COS_HALP(brcm_cos_bind_drop_profile:645): Failed to bind drop profile 1 for ifd index 783
fpc1 BRCM_COS_HALP(brcm_cos_unbind_drop_profile_queue:554): Failed to set discard setting for port 7
fpc1 BRCM_COS_HALP(brcm_cos_sched_bind_drop_profile:901): Drop profile 1 bind failed for ifd 783queue num 0
fpc1 BRCM_COS_HALP(brcm_ng_flat_hr_bind_sm_ifd:2770): Failed to bind DP to Queue 0 ifd 783

 

Thx,

Ar

7 REPLIES 7
Ethernet Switching

Re: BRCM_COS_HALP

‎06-06-2019 11:41 PM

oks like you try to configure something that is not supported on this ex ( Feature unavailable)

Show your configuration

Ethernet Switching

Re: BRCM_COS_HALP

‎06-07-2019 03:29 AM
HI Arix, Did you do any cos related configuration commit and then you saw these messages ? Any interface flap during this time ? Any core-dump file ? Please share configuration and let us know if there was any trigger of these messages Thanks and Regards, Aman Kesar
Ethernet Switching

Re: BRCM_COS_HALP

[ Edited ]
‎06-12-2019 01:14 PM

Hello,

 

What is the EX device on which you are seeing these messages and what is the version running on it? 

 

Thanks,

Puneet

Ethernet Switching

Re: BRCM_COS_HALP

a month ago

hi All,

 

Yeah, Cos implementation there is on the ex..  How to approach to identify the problem on COS implementation that generates the log that I provided? Ver 18.2R2. 

 

 

Thx

A

Ethernet Switching

Re: BRCM_COS_HALP

a month ago

The issue is with port 7 so let's start by looking at the CoS profile associated with that interface.  

show configuration | display set | match ge-0/0/7

 

Then expand the full listing for the CoS filter once identified.

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Ethernet Switching

Re: BRCM_COS_HALP

a month ago

@Arix wrote:

hi All,

 

Yeah, Cos implementation there is on the ex..  How to approach to identify the problem on COS implementation that generates the log that I provided? Ver 18.2R2. 

[ANS] It's likely related to some drop profile configured until class-of-service stanza.  The right way is to check the timestamp of logs and compare with "show system commit".  If you see the logs after a certain commit time, that's the configuration you want to check (show system rollback compare x y).  Another way is to simple check "show configuration" and look for any "Unsupported" flags in the class-of-service stanza.

 

Thx

A


Hope this helps.

Regards,
-r.

--------------------------------------------------

If this solves your problem, please mark this post as "Accepted Solution."
Kudos are always appreciated Smiley Happy.

Ethernet Switching

Re: BRCM_COS_HALP

a month ago

Hi 

 

Can you share the Cos configuration from this box ?

I think you are trying to add some cos configuration which the device is not able to allocate in the hardware and hence the error message.