Ethernet Switching
Highlighted
Ethernet Switching

Configuring existing VLANS in bulk.

‎08-26-2015 09:26 PM

This sounds like a bit of a stupid question i'm sure but I thought i'd ask.

I have a customer with a network of multiple EX series switches in vitual chassis (a few different virtual chassis), all configured with multiple VLANs. 

One of the VCs has about 100 vlans.  This a QFX5100 based VC configured as a server switch with a lot of vlans for an OpenStack  deployment.  I want to configure "vlan-prune" for these vlans but I DON'T want to manually do it.  Is there a way to use wildcards or wildcard-range for this, or a global statement i can use? 

I really really don't want to recommend that they manually write set statements for configuring this.

Senior Engineer at Synoptek, LLC.
JNCIP-ENT
JNCIS-SEC

Aspiring JNCIE.
My words are my own.
1 REPLY 1
Highlighted
Ethernet Switching
Solution
Accepted by topic author maeltor
‎08-26-2015 09:38 PM

Re: Configuring existing VLANS in bulk.

‎08-26-2015 09:38 PM

Nevermind I figured it out.

Using Configuration Groups and applying them to the VLAN stanza made it easy. 

Senior Engineer at Synoptek, LLC.
JNCIP-ENT
JNCIS-SEC

Aspiring JNCIE.
My words are my own.