Ethernet Switching
Highlighted
Ethernet Switching

EX2200, when IP assigned to link interface POE stops operating

‎01-21-2019 03:08 AM

Hi All, 

 

A little weird one I have come across recently and seeking some advice. 

 

I have configured an EX2200 in an education environment to provide POE to a set of AP's. 

Set it up the same as any of the other EX2200's there, but found as soon as I assign an IP for the switch, POE drops and will not power any of the AP's enough to work. If I remove the IP on the interface, everything starts working again. 

 

I recently upgraded the firmware to 12.3R12.4 to try and resolve but this does not show any difference. 

 

Is there anything someone can suggest to try and work through this?

Currently I cannot remote manage the switch, which is undesirable but can be worked around. 

1 REPLY 1
Highlighted
Ethernet Switching

Re: EX2200, when IP assigned to link interface POE stops operating

‎04-05-2019 06:41 AM

Hi,

 

Could you show logs from the time frame when you commit changes from "family ethernet-switching" to "family inet"?

Did you try these steps for troubleshooting?

Feedback