Ethernet Switching
Highlighted
Ethernet Switching

EX3200 Implementing QoS

07.20.11   |  
‎07-20-2011 11:39 AM

I have a 60-node network where I am supporting several customers.  Some run VoIP and some do not.  I run each customer on a separate VLAN on a dedicated port ont he EX3200 switch.

 

How do I implement QoS so that all customers' traffic gets prioritized for voice?  I am trying to set a global parameter rather than configure at the port level of each switch.

 

Last note...prefer to be done using jweb.  Thanks in advance!

1 REPLY
Ethernet Switching

Re: EX3200 Implementing QoS

07.26.11   |  
‎07-26-2011 08:03 PM
To answer this would take many, many pages of text as QoS is one of the more advanced topics in Junos. In the meantime there is an excellent white paper which covers the subject matter, specifically focused on enabling class of service the EX device - http://www.juniper.net/us/en/local/pdf/implementation-guides/8010073-en.pdf

HTHs.
Stefan Fouant
Juniper Ambassador
JNCIE-SP, JNCIE-ENT, JNCIE-SEC, JNCI, CISSP, PCNSE, VCP-DV

Check out my blog at ShortestPathFirst

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!