can someone pls. sheed a light on the following log messages:
chassisd: PoE port name ge-0/0/2 status 1chassisd: PoE port name ge-0/0/2 status 27chassisd: PoE port name ge-0/0/2 status 37
What is the meaning of the different states?
Thanks in advance,
Hi,The status 27 indicates OFF and 1 indicates ON.These messages are informational & they are related to the status of the PoE on the interfaces.
Do you you still these messages?
We see this (and similar) messages from time to time.
As we have a large WiFi infrastructure, the PoE state would help us with troubleshooting the state of the APs.
Is there a complete list of states available?
For example there are other messages as well, e.g.
chassisd: PoE port name ge-0/0/2 status 37
37 is when port isn't opterational. chassisd status is for jtac debug info and you get these messages if port flaps.
Generally you should verify the port state/status with:
-> show poe interface
-> show poe controller
For more info on status <no>, you should log a ticket with jtac.
© 1999 - 2019 Juniper Networks, Inc.
All rights reserved