I have a EX4500 need to configure a GRE tunnel. But I found there's no gr ports
The systerm version is:
EX4500-1> show version
fpc0: --------------------------------------------------------------------------
Hostname: SRN-EX4500-1
Model: ex4500-40f JUNOS Base OS boot [12.3R10.2]
JUNOS Base OS Software Suite [12.3R10.2]
JUNOS Kernel Software Suite [12.3R10.2]
JUNOS Crypto Software Suite [12.3R10.2]
JUNOS Online Documentation [12.3R10.2]
JUNOS Enterprise Software Suite [12.3R10.2]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R10.2]
JUNOS Routing Software Suite [12.3R10.2]
JUNOS Web Management [12.3R10.2]
JUNOS FIPS mode utilities [12.3R10.2]
And there's no tunnel-port command on EX4500
EX4500-1# set fpc 0 pic 0 ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups no-multi-rate Disable multi-rate mode
> q-pic-large-buffer Run in large delay buffer mode
> sfpplus Sfpplus configuration option
But another EX4200 with 12.3R4 have this command:
EX4200# set chassis fpc 0 pic 0 ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
no-multi-rate Disable multi-rate mode
> q-pic-large-buffer Run in large delay buffer mode
> sfpplus Sfpplus configuration option
> tunnel-port Tunnel port number