Ethernet Switching
Highlighted
Ethernet Switching

EX4500 and EX4200 Extended Virtual Chassis - Urgent

‎10-04-2012 10:58 PM
Hello, I have stuck with an issue. I have 1 EX4500 and 2 EX4200. Both are on different floors. I enabled the mixed mode. But not able to make VC. Is it possible if i can make extended virtual chassis using xe-0/0/39 (of EX4500) and xe-0/1/0 (of EX4200)? If not then how can i make extended virtual chassis between EX4500 and Ex4200? I have installed 11.4R2.14 JUNOS on both stacks . I had made extended VC using EX4200 and mixed mode chassis with EX4500 adn EX4200 but stuck on this. Thank you.
sunny solanki
3 REPLIES 3
Highlighted
Ethernet Switching

Re: EX4500 and EX4200 Extended Virtual Chassis - Urgent

‎10-06-2012 08:19 PM

Hey Sunny

This link to the documentation should help you out.

 

http://www.juniper.net/techpubs/en_US/junos11.4/topics/example/virtual-chassis-ex4200-multiple-wirin...

 

 

-Adam
Highlighted
Ethernet Switching

Re: EX4500 and EX4200 Extended Virtual Chassis - Urgent

‎10-07-2012 12:19 AM

Hi Acooley,

 

Thank for the information.

 

The link which you have sent describes the VC for EX4200.

 

I Am trying to make VC between EX4200 and EX4500.

 

i do not have SFP or XFP module for 4500.

 

I am trying to make VC through XE-0/0/39 for 4500 (10Gig Ethernet port) between SFP port of EX4200.

 

I have executed the command but it is not working on EX4500.

 

Thts wht i wnt to know the wht to configure on ex 4500 for xe-0/0/39 port to make it VC port ?

sunny solanki
Highlighted
Ethernet Switching

Re: EX4500 and EX4200 Extended Virtual Chassis - Urgent

‎12-24-2014 04:49 PM

Hi,

 

This is kind of a old post, but here is how you can do it anyways:

 

> request virtual-chassis vc-port set pic-slot <#> port <#>

 

PV,

Andres

 

 

Feedback