Hi,
We have an EX4500 in a VC. When i do show interface terese, heaps of the interfaces dont show up at all.
is this becauses there is nothing connected to them? Why don't they show up as 'up down' like some of the others... See below output;
show interfaces terse
Interface Admin Link Proto Local Remote
xe-0/0/1 up up
xe-0/0/1.0 up up eth-switch
xe-0/0/2 up up
xe-0/0/2.0 up up eth-switch
xe-0/0/3 up up
xe-0/0/3.0 up up eth-switch
xe-0/0/12 up up
xe-0/0/12.0 up up eth-switch
xe-0/0/14 up up
xe-0/0/14.0 up up eth-switch
xe-0/0/28 up down
xe-0/0/28.0 up down eth-switch
xe-0/0/30 up up
xe-0/0/30.0 up up eth-switch
xe-0/0/39 up up
xe-0/0/39.0 up up aenet --> ae0.0
xe-1/0/1 up down
xe-1/0/1.0 up down eth-switch
xe-1/0/2 up up
xe-1/0/2.0 up up eth-switch
xe-1/0/3 up up
xe-1/0/3.0 up up eth-switch
xe-1/0/12 up up
xe-1/0/12.0 up up eth-switch
xe-1/0/14 up up
xe-1/0/14.0 up up eth-switch
xe-1/0/24 up up
xe-1/0/24.0 up up eth-switch
xe-1/0/28 up down
xe-1/0/28.0 up down eth-switch
xe-1/0/30 up up
xe-1/0/30.0 up up eth-switch
xe-1/0/39 up up
xe-1/0/39.0 up up aenet --> ae0.0
vcp-0 up up
That is the full output....