Many thanks for the reply!
I've tried to apply, but it does not seem to work:
set vlans pvlan vlan-id 100
set interfaces ae1 unit 0 family ethernet-switching port-mode trunk
set interfaces ae1 unit 0 family ethernet-switching vlan members pvlan
set interfaces ge-0/0/24 unit 0 family ethernet-switching port-mode access
set interfaces ge-1/0/24 unit 0 family ethernet-switching port-mode access
set interfaces xe-0/0/0 unit 0 family ethernet-switching port-mode access
set interfaces xe-1/0/0 unit 0 family ethernet-switching port-mode access
set vlans pvlan no-local-switching
set vlans pvlan interface ae1.0
set vlans cust_01 interface ge-0/0/24.0
set vlans cust_01 interface ge-1/0/24.0
set vlans cust_02 interface xe-0/0/0.0
set vlans cust_02 interface xe-1/0/0.0
set vlans cust_01 primary-vlan pvlan
set vlans cust_02 primary-vlan pvlan
set interfaces vlan unit 100 family inet address 10.10.10.6/24
set interfaces vlan unit 100 proxy-arp unrestricted
set interfaces vlan unit 100 family inet no-redirects
set vlans pvlan l3-interface vlan.100
- When applying to primary VLAN:
{master:0}[edit]
root@switch01# commit check
[edit vlans]
'pvlan'
L3-interface cannot be specified in Private VLAN
error: configuration check-out failed
- When applying to secondary VLAN:
{master:0}[edit vlans cust_01]
root@switch01# commit check
[edit vlans]
'cust_01'
L3-interface cannot be specified in Private VLAN
error: configuration check-out failed
and for the sake of clarity, I am running Junos 15.1R7-S7.1.
Any hint would be highly appreciated.