Ethernet Switching
Highlighted
Ethernet Switching

EX9200 virtual environment

‎07-29-2018 03:06 AM

hello Junos

 

dose juniper have a tool or virtual environment i can use or even rent that support ex9200 and MC-LAG to practice in?

5 REPLIES 5
Highlighted
Ethernet Switching

Re: EX9200 virtual environment

‎07-29-2018 06:50 AM

The virtual QFX platform would be your best bet for this.  You can download the vQFX from the support site.

 

https://www.juniper.net/support/downloads/?p=vqfxeval

 

If your account is not authorizied for it already, open an admin support case with the url requesting access for demo download.

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
Ethernet Switching

Re: EX9200 virtual environment

‎07-29-2018 10:44 AM

thanks Steve for your feedback, i did what you suggest but somehow the xe intterface wont appear

root@vqfx-re> show chassis fpc pic-status

{master:0}
root@vqfx-re> show chassis fpc
                     Temp  CPU Utilization (%)   CPU Utilization (%)  Memory    Utilization (%)
Slot State            (C)  Total  Interrupt      1min   5min   15min  DRAM (MB) Heap     Buffer
  0  Empty           
  1  Empty           
  2  Empty           
  3  Empty           
  4  Empty           
  5  Empty           
  6  Empty           
  7  Empty           
  8  Empty           
  9  Empty           

{master:0}

 

its been like this since an hour or so

 

Highlighted
Ethernet Switching
Solution
Accepted by topic author Ahmed Ash
‎08-10-2018 07:52 AM

Re: EX9200 virtual environment

‎07-30-2018 08:43 AM

@aash - I might suggest that VMX would be a better option for this, as MX and EX9200 are very similar products.  Juniper does not have VEX SW, but VMX might be easier to use as this is a released product, with documentation and such, while VQFX is still non-productized.  You can get VMC 60-day trial at:

 

https://www.juniper.net/us/en/dm/free-vmx-trial/

 

Good luck.

Ethernet Switching

Re: EX9200 virtual environment

‎08-10-2018 07:51 AM

hey rccpgm

 

im following this pdf to make the MC-LAG configuration but there is something i didnt get

 

https://www.juniper.net/documentation/en_US/release-independent/nce/information-products/pathway-pag...

in the page 33

set protocols iccp peer 192.18.39.1 backup-liveness-detection backup-peer-ip 10.105.5.5

 

the ip 10.105.5.5 is it point to point FXP0 ip or what? and should i advirtise it by ospf

 

2nd question

 

set interfaces irb unit 100 family inet address 192.168.10.2/24 arp 192.168.10.3 mac 00:1f:12:b6:6f:f0

 

what command to show me that needed mac, show int irb ex?

 

and i really appreciate your assistance

 

Highlighted
Ethernet Switching

Re: EX9200 virtual environment

‎08-11-2018 03:18 AM

You might also be interested in the newly released Juniper vLab for free online lab access.

 

https://forums.juniper.net/t5/BLOG-Information-Experience-iX/Read-it-then-try-it-with-Juniper-vLabs/...

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Feedback