Ethernet Switching
Highlighted
Ethernet Switching

Filter based routing on ex2200

‎09-08-2017 01:05 PM

Hi all! I have EX2200.Trying to set up Filter Based Routing.

Why i can't see router-instance in firewall settings? Need I EFL for it?

 

root@EX2200-CORE# set firewall family inet filter Foton_Fbr term 1 then ?
Possible completions:
  accept               Accept the packet
  analyzer             Name of analyzer - (Ingress only)
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
  count                Count the packet in the named counter
> discard              Discard the packet
  forwarding-class     Classify packet to forwarding class
  log                  Log the packet
  loss-priority        Packet's loss priority
  policer              Name of policer to use to rate-limit traffic
> reject               Reject the packet
  syslog               System log (syslog) information about the packet
> three-color-policer  Police the packet using a three-color-policer

5 REPLIES 5
Highlighted
Ethernet Switching

Re: Filter based routing on ex2200

‎09-08-2017 01:36 PM

Hi ,

 

 Looks like EX200 does not support Routing-Instances.  You can go through below thread on Juniper forum.

 

Policy-based routing on the EX 2200?

 

[KUDOS PLEASE! If you think I earned it!

If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]

Highlighted
Ethernet Switching

Re: Filter based routing on ex2200

‎09-09-2017 05:39 AM

in version 12.3r12.4 forwarding instances are supported on the ex2200

 

root# set routing-instances new instance-type forwarding        

 

{master:0}[edit]

root# commit check

configuration check succeeds

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
Ethernet Switching

Re: Filter based routing on ex2200

‎09-10-2017 11:10 PM

I have no problem with creation routing-instance.

But there is no same option in firewall filter.

 

show routing-instances                                                    
Foton {
    instance-type forwarding;
    routing-options {
        static {
            route 0.0.0.0/0 next-hop 192.168.6.6;
        }
    }
}

Highlighted
Ethernet Switching

Re: Filter based routing on ex2200

‎09-11-2017 02:27 AM

You are right the routing instance action item is not on firewall filters for my ex2200 but is there on the ex4200 series both are on Junos 12.3.

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
Ethernet Switching

Re: Filter based routing on ex2200

‎11-09-2017 02:41 AM
Feedback