Ethernet Switching
Highlighted
Ethernet Switching

How to configure Aggregation link without LACP enabled

‎11-22-2019 02:44 AM

Hi ,

 

Wondering what will be equivalent config in Juniper as in Cisco

Static Port Channels - Channel mode on in Cisco.

 

 

1 REPLY 1
Highlighted
Ethernet Switching

Re: How to configure Aggregation link without LACP enabled

[ Edited ]
‎11-22-2019 03:26 AM

Hello,

You need to configure standard AE interface and You just don't enable LACP . Below is untagged static LAG minimal working config example for Juniper EX switch:

 

set chassis aggregated-devices ethernet device-count 8
set interfaces ge-0/0/1 ether-options 802.3ad ae1 set interfaces ge-0/0/2 ether-options 802.3ad ae1 set interfaces ge-0/0/3 ether-options 802.3ad ae1

set interfaces ae1 unit 0 family ethernet-switching

## Don't forget to add this LAG to VLAN

set vlans default interface ae1.0

 

 

HTH

Thx

Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Feedback