Hi all.Can the two non-mixed VCFs (Virtual Chassis Fabric) form MC-LAG please? Meaning each VCF will be MC-LAG peer.
The search in documentation (VCF feature guide / VCF best practises) and forums didn't gave me the clear answer.
The customer wants each server room to be one manageable entity. I would prefer to create one bigger VCF spanning through both server roooms though.The each server room will have VCF made from 2xQFX5100-24Q as spines and 5x QFX5100-48S/ QFX5100-48T as leaves.Thank you.
Go to Solution.
I am fairly certain the answer is no. A node/switch can be configured as either MC-LAG or VCF/VC, not both at the same time.
Now you could connect the 2 x VCF to another pair of switches which are configured to be a MC-LAG pair.
I am not sure of the complete requirements, but making this into a single larger VCF would appear to be a good idea.
MC-LAG is not supported on a standard VC (we found out the hard way with a pair of 24Q's) so I assume not on VCF as well.
Thank you both rccpgm and smicker.I had feeling that this configuration is likely not supported. Accepted as solved.
Thanks. You are correct.