how could I configure a management port on the switch and connect via SSH not using me0. I want a normal ethernet-Port to be used for SSH.
How could I achive that?
set system services ssh
set interfaces ge-0/0/47 unit 0 family inet address 10.0.0.1/24set interfaces ge-0/0/47 description "Management port"
thanks for your reply.
I have tried to do that already, but I get:
root@switch-ipb2# commit confirmed 3 [edit interfaces ge-0/0/12 unit 0 family] 'ethernet-switching' Family ethernet-switching and rest of the families are mutually exclusiveerror: commit failed: (statements constraint check failed)
What coud I else do?
The interface can either be in L2 "ethernet-switching" mode or L3 "inet" mode.
By default all ports are in ethernet-witching mode so you may want to delete that and add the new configs.
You can also use an RVI/IRB to access the device.
delete interfaces ge-0/0/47
commit confimed 3