hello Spuluka
I'm not using the Mgmt interface, i just created a new vlan named it Mgmt with irb adress and ae interface as trunk this is the way i used to do with Cisco.
and i didnt apply any kind of filters unless EX Switches has it by default.
here is ae config from TOR sw
interfaces {
ge-0/0/0 {
ether-options {
802.3ad ae10;
}
}
ge-0/0/1 {
ether-options {
802.3ad ae10;
}
}
ae10 {
aggregated-ether-options {
lacp {
active;
}
}
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
irb {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ex3400-24t;
}
}
}
unit 11 {
family inet {
address 10.10.3.11/24;
----------------------------------------------------
and every TOR sw is connected to Core