Ethernet Switching
Highlighted
Ethernet Switching

Show version command show two junos vesion in one ex2300 switch

[ Edited ]
‎02-08-2020 10:40 AM

Hi,

 

After upgrading to the new stable version, one of the switches in ex2300 virtual chassis show two Junos version and one is shown as pending. what would be the real reason?

fpc1:
--------------------------------------------------------------------------
Hostname: Kannur-Test
Model: ex2300-48t
Junos: 18.2R3-S2.9
Pending: 18.2R3.4
JUNOS OS Kernel 32-bit [20191022.14c2ad5_builder_stable_11]
JUNOS OS libs [20191022.14c2ad5_builder_stable_11]
JUNOS OS runtime [20191022.14c2ad5_builder_stable_11]
JUNOS OS time zone information [20191022.14c2ad5_builder_stable_11]
JUNOS py extensions [20191115.190104_builder_junos_182_r3_s2]
JUNOS py base [20191115.190104_builder_junos_182_r3_s2]
JUNOS OS crypto [20191022.14c2ad5_builder_stable_11]
JUNOS network stack and utilities [20191115.190104_builder_junos_182_r3_s2]
JUNOS libs [20191115.190104_builder_junos_182_r3_s2]
JUNOS runtime [20191115.190104_builder_junos_182_r3_s2]
JUNOS Web Management Platform Package [20191115.190104_builder_junos_182_r3_s2]
JUNOS ex libs [20191115.190104_builder_junos_182_r3_s2]
JUNOS ex runtime [20191115.190104_builder_junos_182_r3_s2]
JUNOS ex platform support [20191115.190104_builder_junos_182_r3_s2]
JUNOS dcp network modules [20191115.190104_builder_junos_182_r3_s2]
JUNOS modules [20191115.190104_builder_junos_182_r3_s2]
JUNOS ex modules [20191115.190104_builder_junos_182_r3_s2]
JUNOS ex Data Plane Crypto Support [20191115.190104_builder_junos_182_r3_s2]
JUNOS daemons [20191115.190104_builder_junos_182_r3_s2]
JUNOS SDN Software Suite [20191115.190104_builder_junos_182_r3_s2]
JUNOS Extension Toolkit [20191115.190104_builder_junos_182_r3_s2]
JUNOS Phone-home [20191115.190104_builder_junos_182_r3_s2]
JUNOS Packet Forwarding Engine Support (EX34XX) [20191115.190104_builder_junos_182_r3_s2]
JUNOS jdocs ex [20191115.190104_builder_junos_182_r3_s2]
JUNOS jail runtime [20191022.14c2ad5_builder_stable_11]
JUNOS FIPS mode utilities [20191115.190104_builder_junos_182_r3_s2]

 

Thanks,
Jsree

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....
2 REPLIES 2
Highlighted
Ethernet Switching

Re: Show version command show two junos vesion in one ex2300 switch

‎02-08-2020 11:01 AM

Hi jsree,

 

 It looks the upgrade was not applied on FPC1. Try rebooting only that member so it can complete any pending changes, or run "request system software rollback member 1" to cancel the pending upgrade. 

 

 If needed, after those steps, you can reinstall the image only on that particular switch by adding "member 1 reboot" on the upgrade command.

 

Best regards,

Esteban,

 

If it helps clearing your concern, please mark as solved!

Highlighted
Ethernet Switching

Re: Show version command show two junos vesion in one ex2300 switch

‎02-09-2020 06:21 AM
You can try to find on interactive commands files if fpc1 was rebooted or not, or someone else tried to apply a new version.
show log interactive | match "request system" >>>>> check on every interactive command log

When is showing pending, means an installation is pending and rebooting the fpc1 will start the installation (same as what egarro said)

Hope this help!
Franky
Feedback