Ethernet Switching
Ethernet Switching

When Traffic Class not mapped to egress queue but class defined under classifier

09.05.17   |  
‎09-05-2017 12:54 PM

Hi everybody,

 

Please consider the following set up:

 

Let say if we have classifier JOJO on EX 4300

010000—Class B

011000-Class C

 

Forwarding class mapping:

Class C---Queue1

This classifier applies to ge 1/1/0.0

Let say a packet with DSCP 010000 received on the ge 1/1/0.0, Classifier JOJO is used to classify this packet but we do not have egress queue mapped to this class, what will SW do ? Will it place this packet into default queue since there is no mapping between ClassB and queue?

 

 

Thanks and have a nice day!!

 

4 REPLIES
Ethernet Switching
Solution
Accepted by topic author sarahr202
‎09-08-2017 08:29 AM

Re: When Traffic Class not mapped to egress queue but class defined under classifier

[ Edited ]
09.06.17   |  
‎09-06-2017 11:06 PM

Yes that is correct. Classifier is really telling the software what you would like it to do with the packet. But it does not change any fields in the packet header. The marking is applied only with the rewrite rule, so without a matching re-write rule the default will be applied based on th einterface and the device. SRX and Switch have different default and depending on interface type (trunk/access).

The classifier is like a gateman who peeks in the door and say SAM is a VIP, I am giving him a card that you should stamp him with #9 (forwarding class) and send him to booth  9 (queue) where he can get MOET and whatever else(special treatment). But only the Manager (rewrite-rule) can do that. Without the Manager and the stamp(marker for the forwarding class mentioned in the rewrite rule ), he only has the card telling the Manager what to do. But no Manager is there to do it. So he just defaults to the bar. First come first servedSmiley Happy i.o.w the card (classifier) means zilch without the Manager(re-write rule).

[KUDOS PLEASE! If you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Ethernet Switching

Re: When Traffic Class not mapped to egress queue but class defined under classifier

09.08.17   |  
‎09-08-2017 08:30 AM

Thanks

 

Thanks Lyndidon, have a nice Weekend!!

Ethernet Switching

Re: When Traffic Class not mapped to egress queue but class defined under classifier

09.08.17   |  
‎09-08-2017 09:14 AM

Agree - I thought that was an EXCELLENT response!!

Highlighted
Ethernet Switching

Re: When Traffic Class not mapped to egress queue but class defined under classifier

09.08.17   |  
‎09-08-2017 09:47 AM
YW. U2Smiley Happy
[KUDOS PLEASE! If you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]