Ethernet Switching
Ethernet Switching

apply-group level

‎09-26-2019 07:12 PM

Hi all,

Relating to the apply-groups, the following activating apply-group at top level not interface level. Is this correct level or?

 

set groups 1G_INTERFACES <ge-*> speed 1g
set groups 1G_INTERFACES <ge-*> link-mode full-duplex
set groups 1G_INTERFACES <ge-*> ether-options no-auto-negotiation

Set apply-groups 1G_INTERFACES

 

6 REPLIES 6
Ethernet Switching

Re: apply-group level

‎09-26-2019 07:21 PM

Hi Arix,

 

With this group configuration you are applying the speed,link mode and no-auto-negotiation to all the ge- interface in the chassis.

 

Thank you

Prabin 

 

Ethernet Switching

Re: apply-group level

‎09-26-2019 07:37 PM

That is not valid syntax. It should be:

 

set groups 1G_INTERFACES interfaces <ge-*> speed 1g
set groups 1G_INTERFACES interfaces <ge-*> link-mode full-duplex
set groups 1G_INTERFACES interfaces <ge-*> ether-options no-auto-negotiation
Ethernet Switching

Re: apply-group level

[ Edited ]
‎09-26-2019 07:46 PM

 

There are 2 example group configuration below as you can see.

The first example group configuation is activating apply group at the TOP level. Second one at the INTERFACES level.

 

I am asking what is differences? Hope this time my qs is clear...

 

set groups interfaces 1G_INTERFACES <ge-*> speed 1g
set groups interfaces 1G_INTERFACES <ge-*> link-mode full-duplex
set groups interfaces 1G_INTERFACES <ge-*> ether-options no-auto-negotiation
Set apply-groups 1G_INTERFACES

 

set groups interfaces 1G_INTERFACES <ge-*> speed 1g
set groups interfaces 1G_INTERFACES <ge-*> link-mode full-duplex
set groups interfaces 1G_INTERFACES <ge-*> ether-options no-auto-negotiation
Set interfaces apply-groups 1G_INTERFACES

 

Ethernet Switching

Re: apply-group level

‎09-26-2019 07:52 PM
Hi,

Group we configure to bring a set of configuration together,

And apply-group is for applying those set of configuration in the system.

Thank you
Prabin
Ethernet Switching

Re: apply-group level

‎09-26-2019 10:03 PM
This is more or less the same,both are getting applied only to ge-*

set groups interfaces 1G_INTERFACES <ge-*> speed 1g set groups interfaces 1G_INTERFACES <ge-*> link-mode full-duplex set groups interfaces 1G_INTERFACES <ge-*> ether-options no-auto-negotiation Set interfaces apply-groups 1G_INTERFACES

Ethernet Switching

Re: apply-group level

‎09-27-2019 01:58 AM