Ethernet Switching
Ethernet Switching

dot1x default config.

‎01-13-2019 12:45 AM

Hi everyone,


Please consider the following example:

PC ---------f1 EX SEf2-- Radius server.

PC and radius server are configured for username  test,  password test .  EX and radius server uses secret key king.

Design goal:

As long as PC provides correct user name test password test, port should be moved to authenticated state on EX.

Assume PC and radius server are correctly configured, what is the minimum config needed to acheive the above goal?


Below are my config: 

set protocols dot1x authenticator authentication-profile-name test
set protocols dot1x authenticator interface f1/1

set protocols access radius-server port 1812
set protocols access radius-server secret king

set protocols access profile test authentication-order radius
set protocols access profile test radius authentication-server


Am I missing anything?


Thanks and have a nice weekend!!




Ethernet Switching

Re: dot1x default config.

‎04-05-2019 06:47 AM

Good day,


Please use this documen as a reference.

In your case, you did misprint in interface name. It should be like fe-0/0/0 or ge-0/0/0 or something from this list.