Ethernet Switching
Highlighted
Ethernet Switching

ex4300 rate limit, please.

‎10-11-2014 06:40 PM

Hi, Everyone

 

Could you give me a example how to limit a port rate to 200m? I am currently have a port connected to HP switch, I want to limit this port speed like 200M. Also burst rate can setup 30k. Thank you so much.

1 REPLY 1
Highlighted
Ethernet Switching

Re: ex4300 rate limit, please.

‎10-12-2014 01:26 AM

Sounds like question is twofold.

To configure a policer, here is an example:

http://www.juniper.net/techpubs/en_US/junos12.2/topics/task/configuration/firewall-filter-ex-series-...

There are only 3 available port speeds: 10 m 100m 1g

http://www.juniper.net/techpubs/en_US/junos12.2/topics/task/configuration/firewall-filter-ex-series-...

http://www.juniper.net/documentation/en_US/junos13.3/topics/task/configuration/ex-series-gigabit-int...

 

[KUDOS PLEASE! If you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Feedback