Just because not officially supported (that is tested) since the products and optics all conform to same standard, the optic is likely to work, but will probably not be recognized nor have DOM support.
EX2300-C Ethernet Switch delivers a compact, silent, andpower-efficient platform for low-density branch deployments and commercial access orenterprise workgroup environments outside the wiring closet. Featuring 12 10/100/1000BASE-T access ports and two 10GbE uplink ports with and without Power over Ethernet (PoE/PoE+) in a fanless design, the EX2300-C switches deliver a powerful solution for supporting services such as unified communications, IP telephony, closed circuit television (CCTV), and other applications in office, classroom, hospitality, and other space and wiring-constrained environments. The key features of the EX2300-C switch include: • Multiple hardware configurations: - 12 10/100/1000BASE-T access ports and two SFP+ 10GbE uplink ports - 12 10/100/1000BASE-T PoE/PoE+ access ports and two SFP+ 10GbE uplink ports
Please go through the below document for better understanding.
Interface Options • 1GbE SFP: 24(40) (with 10GbE expansion modules) • 10GbE SFP+: 24(40/72) (with 10GbE expansion modules/with fixed 40GbE ports using breakout cables) • 40GbE QSFP+: 4(12) (with expansion modules) - Each fixed QSFP+ port can be configured as a 4x10GbE interface - Each QSFP+ port can be configured as a 40 Gbps port - USB port - Console port - 2 management ports: 1 RJ-45 and 1 SFP - Supported transceiver and direct attach cable - SFP+ 10GbE optical modules - SFP+ DAC cables: 1/3/5 m direct-attached copper and 1/3/5/7/10 m active direct-attached copper - SFP GbE optical and copper module - QSFP+ to SFP+ 10GbE direct attach break-out copper (1/3 m direct-attached copper cable)
You can view the specification of the below optics which can support upto 100 Metres copper cables:
I know that others has pointed out that the JNP-SFPP-10GE-T isn't qualified for either EX2300 or EX4600... but there is another basic problem: The 10G-BaseT standard defines a maximum length of 30 meter via cat6a cabling... so this will never work.
With you distance and speed requirements, a fiber solution is required. The cheapest option will be with multi-mode optics (EX-SFP-10GE-SR) and a OM3/OM4 multi-mode fiber cable.
@jonashauge - I believe 10GBase-T standard, like all other Base-T standards, supports up to 100m. To run at these greater distances the 10GBase-T cabling must be Cat 6 or better. Cat 5/5e maybe limited to 30m.