Switching

Hi Guys!

  how to disable virtual chassis on ex4200-48t，

 i try to entering the shell /config/vchassis delete all files  and close all vc-port  then restart the ex4200“invalid” 

root> show version
fpc0:
--------------------------------------------------------------------------
Model: ex4200-48t
Junos: 15.1R4.6
JUNOS EX Software Suite [15.1R4.6]
JUNOS FIPS mode utilities [15.1R4.6]
JUNOS Online Documentation [15.1R4.6]
JUNOS EX 4200 Software Suite [15.1R4.6]
JUNOS Web Management Platform Package [15.1R4.6]
JUNOS Web Management Application package [15.1A2.2]

root> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighboror ID (mbps) ID Interface 

PIC / Port
vcp-0 Dedicated 1 Disabled 32000
vcp-1 Dedicated 2 Disabled 32000

{master:0}
root> show virtual-chassis status

Virtual Chassis ID: 1e17.0000.0000
Virtual Chassis Mode: Enabled
Mstr Mixed Route Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID Interface
0 (FPC 0) Prsnt BP0000000000 ex4200-48t 128 Master* N VC

Member ID for next new member: 1 (FPC 1)

{master:0}

Thanks 

Jun

In general, do not delete configuration files from the shell directories.  This is the rpocedure to remove virtual chassis.

http://www.juniper.net/techpubs/en_US/junos15.1/topics/task/configuration/virtual-chassis-ex4200-ex4500-switch-removing-cli.html

Hello Steve thank you for your help

But prompt with no change the configration

thanks

Hi HAHA,

Virtual chassis is enabled by default on EX4200, but it will not work until you plug in a VC cable and connect the switch to an other switch with VC supported.

I dont know what is the reason you want to disable VC mode, but there will be no difference when it is enabled on a standalone EX4200.

Hope this help.