Ethernet Switching
Highlighted
Ethernet Switching

how to disable the virtual chassis mode on ex4200

[ Edited ]
‎10-02-2016 06:11 AM

Hi Guys!

 

  how to disable virtual chassis on ex4200-48t,

 i try to entering the shell /config/vchassis delete all files  and close all vc-port  then restart the ex4200“invalid” 

 

root> show version
fpc0:
--------------------------------------------------------------------------
Model: ex4200-48t
Junos: 15.1R4.6
JUNOS EX Software Suite [15.1R4.6]
JUNOS FIPS mode utilities [15.1R4.6]
JUNOS Online Documentation [15.1R4.6]
JUNOS EX 4200 Software Suite [15.1R4.6]
JUNOS Web Management Platform Package [15.1R4.6]
JUNOS Web Management Application package [15.1A2.2]

 

root> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighboror ID (mbps) ID Interface 

PIC / Port
vcp-0 Dedicated 1 Disabled 32000
vcp-1 Dedicated 2 Disabled 32000

{master:0}
root> show virtual-chassis status

Virtual Chassis ID: 1e17.0000.0000
Virtual Chassis Mode: Enabled
Mstr Mixed Route Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID Interface
0 (FPC 0) Prsnt BP0000000000 ex4200-48t 128 Master* N VC

Member ID for next new member: 1 (FPC 1)

{master:0}

 

B05074A4-B298-43BE-ADA7-5C8DC5789828.png 

Thanks 

Jun

4 REPLIES 4
Highlighted
Ethernet Switching

Re: how to disable the virtual chassis mode on ex4200

‎10-02-2016 04:52 PM

In general, do not delete configuration files from the shell directories.  This is the rpocedure to remove virtual chassis.

 

http://www.juniper.net/techpubs/en_US/junos15.1/topics/task/configuration/virtual-chassis-ex4200-ex4...

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
Ethernet Switching

Re: how to disable the virtual chassis mode on ex4200

‎10-03-2016 05:12 AM

Hello Steve thank you for your help

But prompt with no change the configration

F5FA44FB-340B-4EFB-B910-2146949523A4.png

 

thanks

Highlighted
Ethernet Switching

Re: how to disable the virtual chassis mode on ex4200

‎10-10-2016 05:58 AM

Hi HAHA,

 

Virtual chassis is enabled by default on EX4200, but it will not work until you plug in a VC cable and connect the switch to an other switch with VC supported.

 

I dont know what is the reason you want to disable VC mode, but there will be no difference when it is enabled on a standalone EX4200.

 

Hope this help.

Highlighted
Ethernet Switching

Re: how to disable the virtual chassis mode on ex4200

‎10-15-2016 02:55 AM
Try this out

https://forums.juniper.net/t5/Ethernet-Switching/Disable-Virtual-Chasis-on-EX4200/td-p/46663
Regards,
A'bed AL-R.
[JNCSP-SEC JNCDA JNCIS-ENT Ingenious Champion|Sec]
https://srxtech.wordpress.com