Ethernet Switching
Highlighted
Ethernet Switching

incorrect alarms count in jnxCraftAlarms for EX8208 virtual-chassis

‎11-25-2011 03:35 AM

Hello,

we have virtual-chassis with 2x8208 and 2xXRE200. As I can see, snmp subtree of jnxCraftAlarms returns only information about alarms on XRE200 - member8 and member9, but not from 8208 chassis - member0 and member1.

Junos version is 11.4R1.6.

 

Sample with 2 red alarms on member 0 + 2 yellow alarms on members 8 and 9:

> show chassis alarms    
member0:
--------------------------------------------------------------------------
2 alarms currently active
Alarm time               Class  Description
2011-11-25 12:31:39 GET  Major  PSU 3 Output Failure
2011-11-25 12:31:39 GET  Major  PSU 2 Output Failure

member1:
--------------------------------------------------------------------------
No alarms currently active

member8:
--------------------------------------------------------------------------
1 alarms currently active
Alarm time               Class  Description
2011-11-25 15:32:33 GET  Minor  Temperature Warm

member9:
--------------------------------------------------------------------------
1 alarms currently active
Alarm time               Class  Description
2011-11-25 15:32:33 GET  Minor  Temperature Warm
=================================================

> show snmp mib walk jnxCraftAlarms    
jnxAlarmRelayMode.0 = 2
jnxYellowAlarmState.0 = 3
jnxYellowAlarmCount.0 = 2
jnxYellowAlarmLastChange.0 = 0
jnxRedAlarmState.0 = 2
jnxRedAlarmCount.0 = 0
jnxRedAlarmLastChange.0 = 0

 

 

Feedback