Ethernet Switching
Ethernet Switching

is it vQFX support COS?

‎05-19-2019 10:31 AM

Hi all,

 

First of all apologize if this VQFX question in wrong thread. Secondly i'm try to configure the COS on vQFX ver 15 but it throw error when to bind it into interface as below. Appreciate any help.

 

[edit class-of-service interfaces xe-0/0/0 classifiers]
'dscp default'
Interface based classifier not supported on (xe-0/0/0)
error: configuration check-out failed

 

{master:0}[edit class-of-service interfaces]
root@DC1-vQFX-1# commit
error: unicast forwarding class set count on interface xe-* exceeds the maximum allowed count of 0
[edit class-of-service interfaces]
'xe-*'
Configuring error on interface xe-*
error: configuration check-out failed

 

5 REPLIES 5
Ethernet Switching

Re: is it vQFX support COS?

‎05-19-2019 09:02 PM

First to answer your question is it supported : Yes

I believe you are trying to apply the classifier directly for the interface which is why you are getting the error message.

Try to create the classifier as below

 

set class-of-service classifiers dscp test forwarding-class TEST loss-priority low code-points 001000

 

and then try to apply the classifier to the interfaces.

 

Hope this helps

Highlighted
Ethernet Switching

Re: is it vQFX support COS?

‎05-19-2019 09:08 PM

Hi kronicklez, 

 

Can you share the CoS configuration?

 

I'm wondering if this behavior is happening to you.

http://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/qfx-series/traff... ----- > pls check page 19: 

“You can configure up to three unicast forwarding class sets and one multicast forwarding class set. For example, you can configure different forwarding class sets to  apply CoS to unicast groups of local area network (LAN) traffic, storage area network (SAN) traffic, and high-performance computing (HPC) traffic, and configure another group for multicast traffic.”

 

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too! Smiley Happy

Ethernet Switching

Re: is it vQFX support COS?

‎05-20-2019 06:47 AM

Hi Franky,

 

Below is my COS config on vQFX. Appreciate any feedback

 

 

 

{master:0}[edit class-of-service]
test@vQFX# show
traffic-control-profiles {
SAN {
scheduler-map SAN;
guaranteed-rate percent 30;
}
NC {
scheduler-map NC;
guaranteed-rate percent 10;
}
DATA {
scheduler-map DATA;
}
}
forwarding-class-sets {
SAN {
class no-loss;
}
NC {
class network-control;
}
DATA {
class best-effort;
}
}
scheduler-maps {
DATA {
forwarding-class best-effort scheduler DATA;
}
SAN {
forwarding-class no-loss scheduler SAN;
}
NC {
forwarding-class network-control scheduler NC;
}
}
schedulers {
DATA {
transmit-rate percent 60;
buffer-size percent 60;
priority low;
}
SAN {
transmit-rate percent 30;
buffer-size percent 30;
priority low;
}
NC {
transmit-rate percent 10;
buffer-size percent 10;
priority low;
}
}

Ethernet Switching

Re: is it vQFX support COS?

‎05-21-2019 11:07 AM

Hi kronicklez, 

 

I received the same error, however you need to add it into the unit so will be able to commit it.

 

root@QFX# commit check

[edit class-of-service interfaces et-* classifiers]

  'dscp default'

    Interface based classifier not supported on (et-*)

error: configuration check-out failed

 

root@QFX# set class-of-service interfaces et-0/0/1 unit 0 classifiers dscp default

 

Do you want to try out this configuration , this works for me, try changing the values , depending of your needs.

 

set class-of-service classifiers dscp ezqos-dscp-classifier import default

 

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-voice-fc loss-priority low code-points 101110

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-control-fc loss-priority low code-points 110000

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-control-fc loss-priority low code-points 011000

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-control-fc loss-priority low code-points 011010

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-control-fc loss-priority low code-points 111000

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-video-fc loss-priority low code-points 100010

set class-of-service classifiers dscp ezqos-dscp-classifier forwarding-class ezqos-video-fc loss-priority low code-points 100000

 

set class-of-service forwarding-classes class ezqos-best-effort queue-num 0

set class-of-service forwarding-classes class ezqos-video-fc queue-num 4

set class-of-service forwarding-classes class ezqos-voice-fc queue-num 5

set class-of-service forwarding-classes class ezqos-control-fc queue-num 7

 

set class-of-service traffic-control-profiles ezqos-voip-sched-maps-low scheduler-map ezqos-voip-sched-maps-low

set class-of-service traffic-control-profiles ezqos-voip-sched-maps-low guaranteed-rate percent 80

set class-of-service traffic-control-profiles ezqos-voip-sched-maps-high scheduler-map ezqos-voip-sched-maps-high

 

set class-of-service forwarding-class-sets ezqos-voip-fcs-low class ezqos-best-effort

set class-of-service forwarding-class-sets ezqos-voip-fcs-low class ezqos-video-fc

set class-of-service forwarding-class-sets ezqos-voip-fcs-high class ezqos-voice-fc

set class-of-service forwarding-class-sets ezqos-voip-fcs-high class ezqos-control-fc

 

set class-of-service interfaces all forwarding-class-set ezqos-voip-fcs-low output-traffic-control-profile ezqos-voip-sched-maps-low

set class-of-service interfaces all forwarding-class-set ezqos-voip-fcs-high output-traffic-control-profile ezqos-voip-sched-maps-high

set class-of-service interfaces all unit 0 classifiers dscp ezqos-dscp-classifier

 

set class-of-service scheduler-maps ezqos-voip-sched-maps-low forwarding-class ezqos-best-effort scheduler ezqos-data-scheduler

set class-of-service scheduler-maps ezqos-voip-sched-maps-low forwarding-class ezqos-video-fc scheduler ezqos-video-scheduler

set class-of-service scheduler-maps ezqos-voip-sched-maps-high forwarding-class ezqos-voice-fc scheduler ezqos-voice-scheduler

set class-of-service scheduler-maps ezqos-voip-sched-maps-high forwarding-class ezqos-control-fc scheduler ezqos-control-scheduler

 

set class-of-service schedulers ezqos-voice-scheduler buffer-size percent 20

set class-of-service schedulers ezqos-voice-scheduler priority strict-high

set class-of-service schedulers ezqos-control-scheduler buffer-size percent 10

set class-of-service schedulers ezqos-control-scheduler priority strict-high

set class-of-service schedulers ezqos-video-scheduler transmit-rate percent 30

set class-of-service schedulers ezqos-video-scheduler buffer-size percent 20

set class-of-service schedulers ezqos-video-scheduler priority low

set class-of-service schedulers ezqos-data-scheduler transmit-rate percent 50

set class-of-service schedulers ezqos-data-scheduler buffer-size percent 50

set class-of-service schedulers ezqos-data-scheduler priority low

 

Ethernet Switching

Re: is it vQFX support COS?

‎05-26-2019 08:56 PM

Hi Franky,

 

 

Do u test on actual QFX or vQFX?

 

Thanks