Ethernet Switching
Highlighted
Ethernet Switching

traceoptions

‎03-13-2019 06:50 PM

Hi all,

 How to check whether or not traceoption is still running on EX switches in VC and how to verify that causes comsuming CPU and Memory?

 

Thx

Erimix

1 REPLY 1
Ethernet Switching

Re: traceoptions

‎03-13-2019 07:19 PM

Hi Erimix,

 

Traceoptions are written to a log file that's configured.  So, just ensure the config is disabled and the file isn't recording anything, that's all.  If traceoptions are still configured, you can disable them.  If they need to be on, then the respective process based on which protocol/service traceoptions are enabled for, needs to be checked.

 

show configuration | grep traceoption ----------> to see if traceoptions are still enabled

show system processes extensive | except 0.00 --------------> to see highest usage processes

 

Hope this helps.

 

Regards,
-r.

--------------------------------------------------

If this solves your problem, please mark this post as "Accepted Solution."
Kudos are always appreciated :).

Feedback