Ethernet Switching
Highlighted
Ethernet Switching

unable to commit

‎08-30-2020 05:03 AM

{master:0}[edit]
bynet@Control-Yar-1# commit
error: Access interface <ge-0/0/12.0> has more than one vlan member: <server> and <camera-area-3>
error: configuration check-out failed

{master:0}[edit]

 

bynet@Control-Yar-1# exit
The configuration has been changed but not committed
Exit with uncommitted changes? [yes,no] (yes)

Exiting configuration mode

{master:0}

 


bynet@Control-Yar-1> show ethernet-switching interfaces ge-0/0/12
Interface State VLAN members Tag Tagging Blocking
ge-0/0/12.0 down server 1 untagged blocked by STP

{master:0}

bynet@Control-Yar-1# delete interfaces ge-0/0/12 unit 0 family ethernet-switching vlan members server
warning: element 'server' not found

4 REPLIES 4
Highlighted
Ethernet Switching

Re: unable to commit

‎08-30-2020 05:14 AM

Hi Merkaza,

 

Is the interface ge-0/0/12 configured under member-range? If that's the case, please follow the solution as mentioned in the following link - https://forums.juniper.net/t5/Management/Unable-to-change-VLAN-member-on-ex3200/td-p/295452



Thanks,
π00bm@$t€®.
Please, Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!
Highlighted
Ethernet Switching

Re: unable to commit

‎08-30-2020 08:49 AM

Hi, try to check configuration with 

show configuration interface ge-0/0/12 | display inheritance

Because there are multiply options to inherit configuration available in switches (groups, interface-range) 



===================================================
If this solves your problem, please mark this post as "Accepted Solution".
If you think that my answer was helpful, please spend some Kudos.
Highlighted
Ethernet Switching

Re: unable to commit

‎09-07-2020 03:26 AM

Hi Merkaza,

 

Greetings,

 

The situation is the following. Interface ge-0/0/12 is configured as an access port. An access port can only have one vlan assigned to it.

 

If you need ge-0/0/12 to pass traffic for more than 1 vlan, it needs to be configured as trunk port. In the other hand, if 0/0/12 is supposed to pass only one vlan, you will need to delete the extra vlans from the configuration.

 

You can send me the output of the following command:
> show configuration interface ge-0/0/12

 

Please mark "Accepted Solution" if this helps.

Kudos are always appreciated

 

Thanks 

Suraj 

Highlighted
Ethernet Switching

Re: unable to commit

‎09-08-2020 01:10 PM

Hello Merkaza,

 

Please also check the "vlans" hierarchy, interface could be add as a member of vlan there as well.

user@switch# set vlans vlan-name interface interface-name

 

Thanks,

Deimos.

Feedback