This error message will be seen if there are no counters attached to VLAN_XLATE entry and we try to detach it. Post that we are still deleting the VLAN_XLATE entry and hence there is no functional impact or side effects.
fpc0 optic_set_activity_led:[FPC:0 PIC:0 Port:1 Chan:0 - Ifd Speed:0] Failed setting activity led to ON =================================================================================================
Probably because of Hardware issue, Turning on the activity led failed. Please reboot the Switch and check.
dc-pfe: L2Token look up failed for bd-id = 14 Token = 50176 ============================================================
The function "brcm_bridge_token_route_lookup" is called as a part of tx packet processing. This function is called to get the egress ifl information. When any interface related configs are remove or added back, there may be chance before updating the L2Token we might call the function "brcm_bridge_token_route_lookup", so it may result in error.Since this has no functional impact, this error can be ignored
fpc0 Error:tvp_optics_sfpt_read: Failed to read eeprom for link 1/2 ====================================================================
SFP read failed. SFP may be faulty or may be Hardware issue with the ports. Please check with alternate known working SPF
Sorry for the delay in my response. I have already written a KB for the log message explanation. It is pending for approval. I am following up with the approval team.I will share with you the link as soon as it gets the approval.