Junos Automation (Scripting)
Junos Automation (Scripting)

juniper SRX ZTP (commiting base configuration automation using TFTP)

[ Edited ]
‎07-25-2018 06:39 AM

i have an SRX 320 connected to a linux machine that  has (DHCP and tftp), and im trying to set up ZTP (zero touch provisioning) in order to get a baseline configuration (root authentication and ssh stuff). i have a config file that contains the base configuration and is specified in the dhcp.conf file.

the SRX recieves an IP address, and gets the right IP address for the location of the file in the tftp server. but the file transfer times out for some reason.
my question is, did anyone set up ZTP for SRX before? and if so, can you please share the steps neccessary to achieve this.

Thanks a lot!