Junos Space Developer
Junos Space Developer

Configuring the SRX cluster

05.28.12   |  
‎05-28-2012 06:51 AM

 

Hi,

 

Could you, please, elaborate the process of SRX cluster configuring through "/api/space/device-management/devices/{id}/exec-rpc" REST API.

 

I'm interesting in what node is primary during configuration. As I understand, configurations should be installed on node0 if it is primary node. In case of load balancing, different nodes could be primary, so configuration could be installed on them in parts. I need to configure only primary node0. Is it possible to do?

2 REPLIES
Highlighted
Junos Space Developer

Re: Configuring the SRX cluster

05.29.12   |  
‎05-29-2012 07:34 AM

Hi,

 

    We are analyzing the solution.  Will respond to this by tommorrow EOD. 

 

 

 

Regards,

 

Vimala.

Junos Space Developer

Re: Configuring the SRX cluster

05.30.12   |  
‎05-30-2012 12:42 AM

 

Hi.

 

From space the device requests will always be sent to node 0 which is the Primary . 

 

In order to verify whether the device is primary/secondary you can use the exec-rpc <get-chassis-cluster-status> which will return whether the device nodes are primary/secondary.


I hope this clears let me know if you have any queries. 

 

 

Regards,

 

Vimala.