Junos Space Developer
Highlighted
Junos Space Developer

How to change the time zone on OpenNmS space?

‎10-19-2017 08:40 PM

Hi All,

 

Under space manegment platform --> Network monitoring --> Report --> resources graph   then we can see the graph. During the setup junos space i'm not make it sync with NTP. After 2 days then i add the NTP and synch with Space Managment platform. But on the resources graph it still show UTC instead follow the NTP on space CLI.

 

Is it any awy to change the time on openNMS? Or i need to reboot the space so openNMS will sync using time zone same as Space?

 

 

Thanks and appreciate any feedback

 

3 REPLIES 3
Highlighted
Junos Space Developer

Re: How to change the time zone on OpenNmS space?

‎10-19-2017 08:51 PM

Check this KB if this solves your problem!

 

Changing the time zone in Junos Space (KB22923)

https://kb.juniper.net/InfoCenter/index?page=content&id=KB22923

 

_
Regards
Malik
4xJNCIE, 3xJNCSP, 3xJNCDS, CCIE, HCIE, VCIX-DCV, VCIX-NV, CISSP, JNCIS-ENT-Cloud, JNCIS-DevOps, PCNSE7

[If it helped to solve your problem, Please mark it "Accept as solution"; Kudos are always Appreciated]
Highlighted
Junos Space Developer

Re: How to change the time zone on OpenNmS space?

‎01-06-2020 12:23 AM

I have the same problem! Did you manage to resolve?

Highlighted
Junos Space Developer

Re: How to change the time zone on OpenNmS space?

‎01-06-2020 12:36 AM
Hi,

Please find the steps given in the KB article-
https://kb.juniper.net/InfoCenter/index?page=content&id=KB22923

Please ensure to stop and start opennms from WebUI.
Steps-

Stop the Network Monitoring service from the Junos Space Network Management Platform user interface:
Select Network Management Platform > Administration > Applications. ...
Right-click Network Management Platform and click Manage Services. ...
Select the Network Monitoring service and click the Stop Service icon. ...
Click Yes.

Wait for the opennms to stop..
And then..

Same Way- start the service from WebUI.

Regards
-Animesh
If this worked for you please flag my post as an "Accepted Solution" so others can be benefited.