Junos OS

Hello!

I'm wondering how to configure NAT on J2320 router. I found a documentation , but there is no command "set services nat" on my router...

I would suggest checking out the following blog:  http://remcobressers.nl/2008/07/configuring-nat-on-juniper-j-series/

It has a really good step by step setup for NAT for Juniper.

As to why you can't set the nat services, what version of JunOS are you running and when you enter the command are you at the top of the hierarchy?

David 

---

dsinn wrote:

I would suggest checking out the following blog:  http://remcobressers.nl/2008/07/configuring-nat-on-juniper-j-series/

It has a really good step by step setup for NAT for Juniper.

Thanks for a link.

 

As to why you can't set the nat services, what version of JunOS are you running

JUNOS Software Release [9.1R1.8] (Export edition)

 

and when you enter the command are you at the top of the hierarchy?

of course:

[edit]
minotaur@cr1-igo.ki# edit services ?
Possible completions:
  <[Enter]>            Execute this command
> rpm                  Real-time performance monitoring
  |                    Pipe through a command
 

 As you can see: no nat sub-command.

---

I sounds like you have JUNOS with enhanced services. Check by running show version (it would show enhanced services). Stateful firewall, NAT and IPSec are in security hierarchy, not services. Check out KB10182 for some application notes. Alsocheck out JUNOS documentation for JUNOS with enhanced services.

-Richard