Junos
Junos

How the configure NAT on J2320 router

‎11-15-2008 01:27 PM

Hello!

I'm wondering how to configure NAT on J2320 router. I found a documentation , but there is no command "set services nat" on my router... Smiley Sad

 

3 REPLIES 3
Junos

Re: How the configure NAT on J2320 router

‎11-15-2008 02:38 PM

I would suggest checking out the following blog:  http://remcobressers.nl/2008/07/configuring-nat-on-juniper-j-series/

It has a really good step by step setup for NAT for Juniper.

 

As to why you can't set the nat services, what version of JunOS are you running and when you enter the command are you at the top of the hierarchy?

 

David 

Junos

Re: How the configure NAT on J2320 router

[ Edited ]
‎11-15-2008 04:30 PM

dsinn wrote:

I would suggest checking out the following blog:  http://remcobressers.nl/2008/07/configuring-nat-on-juniper-j-series/

It has a really good step by step setup for NAT for Juniper.

Thanks for a link.

 

As to why you can't set the nat services, what version of JunOS are you running

JUNOS Software Release [9.1R1.8] (Export edition)

 

and when you enter the command are you at the top of the hierarchy?

of course:

[edit]
minotaur@cr1-igo.ki# edit services ?
Possible completions:
  <[Enter]>            Execute this command
> rpm                  Real-time performance monitoring
  |                    Pipe through a command
 

 As you can see: no nat sub-command.


 

Message Edited by Minotaur on 11-15-2008 04:33 PM
Highlighted
Junos
Solution
Accepted by topic author Minotaur
‎08-26-2015 01:27 AM

Re: How the configure NAT on J2320 router

‎11-15-2008 06:04 PM

I sounds like you have JUNOS with enhanced services. Check by running show version (it would show enhanced services). Stateful firewall, NAT and IPSec are in security hierarchy, not services. Check out KB10182 for some application notes. Alsocheck out JUNOS documentation for JUNOS with enhanced services.

 

-Richard