Junos
Junos

How to check power consumption using CLI in Ex4200 and Ex433

‎04-17-2019 04:54 AM

How do we check power consumption of Ex4200 and Ex300 switch via CLI?

 

2 REPLIES 2
Highlighted
Junos

Re: How to check power consumption using CLI in Ex4200 and Ex433

‎04-17-2019 08:15 AM

Hi,

 

Have you tried:

 

show chassis power-budget-statistics

Junos

Re: How to check power consumption using CLI in Ex4200 and Ex433

‎04-17-2019 10:38 AM

Hi aspx9, 


Looks like EX4200 does not support power budget statistics command, only on EX4300, i have came across with modular  devices like ex62xx , ex82xx , ex92xx that supports the command.

 

root@EX4200-24P> show chassis power-budget-statistics
error: command is not valid on the ex4200-24p

{master:0}
root@EX4200-24P>


{master:0}[edit]
root@ex4300-48P#> show chassis power-budget-statistics
fpc 0:
-------------------------------------------------------------------------
PSU 0 (JPSU-1100-AC-AFO-A ) : 1100 W Online
Power redundancy configuration : N+0
Total power supplied by all online PSUs : 1100 W
Base power reserved : 175 W
Non-PoE power being consumed : 84 W
Total power allocated for PoE : 925 W
Total PoE power consumed : 0 W
Total PoE power remaining : 925 W

{master:0}[edit]
root@ex4300-48P>


--------------------------------------------------

If this solves your problem, please mark this post as "Accepted Solution."
Kudos are always appreciated Smiley Happy  .