Junos
Junos

IPsec P2 - Authentication Algorithm

‎08-19-2019 09:07 AM

Hello,

I have to setup IPsec VPN using SHA-384 authentication method, but i can not find it listed on my junos device options.

 

rp@AR1# set security ipsec proposal ipsec-phase2-proposal authentication-algorithm ?
Possible completions:
hmac-md5-96 HMAC-MD5-96 authentication algorithm
hmac-sha-256-128 HMAC-SHA-256-128 authentication algorithm
hmac-sha1-96 HMAC-SHA1-96 authentication algorithm

 

SHA-384 is not listed. Is there support for this authenthication method?

 

rp@AR1> show version
Hostname: AR1
Model: mx5-t
Junos: 13.3R1.8
JUNOS Base OS boot [13.3R1.8]
JUNOS Base OS Software Suite [13.3R1.8]
JUNOS Kernel Software Suite [13.3R1.8]
JUNOS Crypto Software Suite [13.3R1.8]
JUNOS Packet Forwarding Engine Support (MX80) [13.3R1.8]
JUNOS Online Documentation [13.3R1.8]
JUNOS Services Application Level Gateways [13.3R1.8]
JUNOS Services Jflow Container package [13.3R1.8]
JUNOS Services Stateful Firewall [13.3R1.8]
JUNOS Services NAT [13.3R1.8]
JUNOS Services RPM [13.3R1.8]
JUNOS Services Crypto [13.3R1.8]
JUNOS Services SSL [13.3R1.8]
JUNOS Services IPSec [13.3R1.8]
JUNOS Routing Software Suite [13.3R1.8]

 

Thank you,

Ramiro

1 REPLY 1
Junos
Solution
Accepted by topic author Ramiro
4 weeks ago

Re: IPsec P2 - Authentication Algorithm

[ Edited ]
‎08-19-2019 09:39 AM

Hi Ramiro.

 

It seems like SHA-384 authentication method is not available under IPSec, however, under IKE it is available.

 

Please find the syntax from the following link - https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/authentic...



Thanks,
π00bm@$t€®.
Please, Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!