Model: ex4300-48p
JUNOS EX Software Suite [13.2X51-D35.3].
hello!
I have a juniper 4300 stack that we use for our core routing which has been leaving me a little stumped as to what might be happening on it network wise. Reading up on mac moves it is sounding like with the number of them we are having it could be a possible network loop. Our clients are experiencing slow and intermittnet network connectivity. What I am wondering is if I am even on the right track with focusing so much on the mac move log messages on the core or if I should be looking elsewhere. Below is a chunk of log messages from the core . Any input on the matter would be greatly appreciated our school is loosing patience with me. If there are anymore details you would request for show commands or additional logs let me know happy to provide!
Oct 11 08:36:00 _Core_Stk jdhcpd: DH_SVC_SENDMSG_FAILURE: sendmsg() from 0.0.0.0 to port 67 at 255.255.255.255 via interface 550 and routing instance default failed: Network is down
Oct 11 08:36:09 _Core_Stk pfex: PFE_BCM_NH-,pfe_bcm_nh_l3_hw_install(),478:nh_l3_hw_install - 478 bcm l3 egress created for nh 1639(0:Ok) pfe:0, port:51, vlan:13, l3-intf:4 flags: 0 ^M
Oct 11 08:36:14 _Core_Stk jdhcpd: libstats_op_iflstats_using_sec_index: failed the operation (2) from DB, db_ret: -30989, ret:-7
Oct 11 08:36:15 _Core_Stk l2ald[1125]: L2ALD_MAC_MOVE_NOTIFICATION: MAC Moves detected in the system
Oct 11 08:36:21 _Core_Stk last message repeated 2 times
Oct 11 08:36:39 _Core_Stk last message repeated 4 times
Oct 11 08:36:39 _Core_Stk pfex: PFE_BCM_NH-,pfe_bcm_nh_l3_hw_install(),478:nh_l3_hw_install - 478 bcm l3 egress created for nh 1546(0:Ok) pfe:1, port:51, vlan:13, l3-intf:4 flags: 0 ^M
Oct 11 08:36:41 _Core_Stk l2ald[1125]: L2ALD_MAC_MOVE_NOTIFICATION: MAC Moves detected in the system
Oct 11 08:36:47 _Core_Stk last message repeated 3 times