I am new in Juniper network, having SRX210 Firewall.
I want to configure setup loadbalance with failover between two different ISP (ISP1 & ISP2) and two different LAN network (Front office & Back office)
Current configuratoin are single LAN netowrk in VLAN1 and two ISP with failover.
I want to configure two VLAN Vlan1(front office) & vlan 4 (backoffice) with loadbalance and failover. Vlan1 traffic will pass thru ISP1 and vlan4 traffic will pass thru ISP2.
Anyone who knows the setup kindly assist, it will be highly appreciate.
As I undertand it will work trhough FBF configuration in that case facing toruble to FBF configuration
Thanks in advance
This KB may help you: https://kb.juniper.net/InfoCenter/index?page=content&id=KB22052&actp=METADATA
In addition to what Nellika shared, please refer this updated KB article https://kb.juniper.net/KB17223
This KB will walk you through the configuration steps.
And here is another something, just in case https://kb.juniper.net/KB27946
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!
Did that address the problem?
Are we all set?
Actually, Already I was tried earlier the link you provided but unable to successed, was getting error in firewall filter configuration.
Working on Live so getting downtime in weekend only. I will try again with both configuration.Defenitity will reply and update the status.
Thank you very mcuh and appreciated all of you.
No problem Irfan, thanks for letting us know!