Hi
I have the following, very basic, topology:
Mikrotik -- vMX
I am configuring MLPPP between the vMX and the MikroTik. Here are the session details:
root> show subscribers
Interface IP Address/VLAN ID User Name LS:RI
pp0.3221225473 192.168.1.2 MLPPP_Test default:default
So, the session comes up but I am unable to ping from the vMX to the MikroTik.
Here is the config on the vMX:
set version 18.2R1.9
set system configuration-database resize
set system configuration-database max-db-size 314572800
set system root-authentication encrypted-password "$6$jvgGZ2tZ$QB5UMb5x2VmVz.T9uRbv1PT8uWVXcHEmTZpBG.BKukMp94JhOpfKSP/Tm.MTNVmjzwer6yHhQ0hU9T2Q5dT6y."
set system management-instance
set system services subscriber-management enable
set system syslog user * any emergency
set system syslog file messages any notice
set system syslog file messages authorization info
set system syslog file interactive-commands interactive-commands any
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" ppp-options pap
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" pppoe-options underlying-interface "$junos-underlying-interface"
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" pppoe-options server
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" family inet
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" family mlppp bundle "$junos-bundle-interface-name"
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" family mlppp service-interface si-0/0/0
set dynamic-profiles ml-pp0-member-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" family mlppp dynamic-profile ml-bundle-prof
set dynamic-profiles ml-pp0-member-prof routing-options access route $junos-framed-route-ip-address-prefix next-hop "$junos-framed-route-nexthop"
set dynamic-profiles ml-pp0-member-prof routing-options access route $junos-framed-route-ip-address-prefix metric "$junos-framed-route-cost"
set dynamic-profiles ml-pp0-member-prof routing-options access route $junos-framed-route-ip-address-prefix preference "$junos-framed-route-distance"
set dynamic-profiles ml-pp0-member-prof routing-options access-internal route $junos-subscriber-ip-address qualified-next-hop "$junos-interface-name"
set dynamic-profiles ml-bundle-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" encapsulation multilink-ppp
set dynamic-profiles ml-bundle-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" mrru 1500
set dynamic-profiles ml-bundle-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" short-sequence
set dynamic-profiles ml-bundle-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" fragment-threshold 320
set dynamic-profiles ml-bundle-prof interfaces "$junos-interface-ifd-name" unit "$junos-interface-unit" family inet unnumbered-address lo0.0
set chassis fpc 0 pic 0 inline-services bandwidth 1g
set chassis network-services enhanced-ip
set access-profile no-auth
set interfaces ge-0/0/0 unit 0 family pppoe dynamic-profile ml-pp0-member-prof
set interfaces si-0/0/0 encapsulation generic-services
set interfaces si-0/0/0 unit 0 family inet
set interfaces xe-0/0/0 unit 0
set interfaces fxp0 unit 0 family inet dhcp vendor-id Juniper-vmx-VM5E1773C2E2
set interfaces lo0 unit 0 family inet address 192.168.1.1/32
set access profile no-auth authentication-order none
set access address-assignment pool pool1 family inet network 192.168.1.0/24
Here are the results of the test ping from the vMX to the MikroTik assigned address:
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
Also, it seems that the address is incrementing by 1 every 5 minutes or so.... so it starts by giving out .2 then 5 minutes later it becomes .3 then .4 etc etc
Here is the very basic config on the MikroTik:
/interface pppoe-client
add allow=pap disabled=no interface=ether1 max-mru=1500 max-mtu=1492 name=pppoe-out1 password=password123 user=MLPPP_Test
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip dhcp-client
add disabled=no interface=ether2
Any help appreciated please