Junos
Highlighted
Junos

MX204, statistics on bundle subinterface

‎02-06-2019 03:45 AM

Hi, guys. Why i don't see statistics on bundle subinterface on my MX204

# run show interfaces ae0.1060                
  Logical interface ae0.1060 (Index 359) (SNMP ifIndex 586)
    Flags: Up SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.1060 ]  Encapsulation: ENET2
    Statistics        Packets        pps         Bytes          bps
    Bundle:
        Input :             0          0             0            0
        Output:             0          0             0            0
    Adaptive Statistics:
        Adaptive Adjusts:          0
        Adaptive Scans  :          0
        Adaptive Updates:          0
    Protocol inet, MTU: 1500
    Max nh cache: 100000, New hold nh limit: 100000, Curr nh cnt: 1, Curr new hold cnt: 0, NH drop cnt: 0
      Flags: No-Redirects, Sendbcast-pkt-to-re, User-MTU
      Addresses, Flags: Is-Preferred Is-Primary
        Destination: 1.1.1.0/30, Local: 1.1.1.1, Broadcast: 1.1.1.3
    Protocol multiservice, MTU: Unlimited

# show interfaces ae0.1060        
vlan-id 1060;
family inet {
    mtu 1500;
    no-redirects;
    address 1.1.1.1/30;
}

# show interfaces ae0         
flexible-vlan-tagging;
mtu 9216;
encapsulation flexible-ethernet-services;
aggregated-ether-options {
    lacp {
        active;
    }
}

 

2 REPLIES 2
Highlighted
Junos
Solution
Accepted by topic author Sysoev.M
‎02-07-2019 05:37 PM

Re: MX204, statistics on bundle subinterface

‎02-06-2019 04:05 AM

Kindly change the ether-option to gigether-options and check.

 

ether-options are for EX switches: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/ether-opt...

 

gigether-options are for MX routers: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/gigether-...

Highlighted
Junos

Re: MX204, statistics on bundle subinterface

‎02-06-2019 04:06 AM
Feedback