Junos
Highlighted
Junos

MX480 restriction of traffic through a logical system

‎01-31-2019 02:23 AM

Colleagues, tell me please how to solve a problem :


run show chassis hardware detail

 

Hardware inventory:
Item Version Part number Serial number Description
Chassis JN1269458AFB MX480
Midplane REV 46 750-047862 ACRL9075 Enhanced MX480 Midplane
FPM Board REV 04 760-059208 CALH2470 Front Panel Display
PEM 0 Rev 01 740-063046 QCS1829U0U6 PS 1.4-2.52kW; 90-264V AC in
PEM 1 Rev 01 740-063046 QCS1808U0BN PS 1.4-2.52kW; 90-264V AC in
PEM 2 Rev 01 740-063046 QCS1808U0A6 PS 1.4-2.52kW; 90-264V AC in
PEM 3 Rev 01 740-063046 QCS1829U0UB PS 1.4-2.52kW; 90-264V AC in
Routing Engine 0 REV 06 750-072923 CALV3483 RE-S-2X00x6
vtbd0 15361 MB Virtio Block Disk
vtbd1 15360 MB Virtio Block Disk
ada0 511 MB QEMU HARDDISK QM00002 Emulated IDE Disk
usb0 (addr 1) XHCI root HUB 0 0x8086 uhub0
Routing Engine 1 REV 06 750-072923 CALV3458 RE-S-2X00x6
vtbd0 15361 MB Virtio Block Disk
vtbd1 15360 MB Virtio Block Disk
ada0 511 MB QEMU HARDDISK QM00002 Emulated IDE Disk
usb0 (addr 1) XHCI root HUB 0 0x8086 uhub0
CB 0 REV 12 750-062572 CALV4093 Enhanced MX SCB 2
CB 1 REV 12 750-062572 CALM0126 Enhanced MX SCB 2
FPC 0 REV 33 750-028467 ABBR6831 MPC 3D 16x 10GE
CPU REV 11 711-029089 ABBR8679 AMPC PMB
PIC 0 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 1s NON-JNPR YT180905045 SFP+-10G-LR
Xcvr 1 mjSF NON-JNPR YT180905044 SFP+-10G-LR
Xcvr 2 n NON-JNPR SDAQ870033 SFP+-10G-LR
Xcvr 3 NON-JNPR SOC091609195044 SFP+-10G-LR
PIC 1 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 NON-JNPR YT180905043 SFP+-10G-LR
Xcvr 1 NON-JNPR YT180905042 SFP+-10G-LR
Xcvr 2 NON-JNPR YT180905041 SFP+-10G-LR
Xcvr 3 NON-JNPR S1706213874 SFP+-10G-LR
PIC 2 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 NON-JNPR FCIB150925035 SFP+-10G-LR
Xcvr 1 W NON-JNPR FNSRMYAMN0A8T SFP+-10G-LR
Xcvr 2 NON-JNPR SD5W830057 SFP+-10G-LR
Xcvr 3 NON-JNPR FT20161217350 SFP+-10G-LR

PIC 3 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 3 NON-JNPR SA9F170309 SFP+-10G-LR
FPC 2 REV 41 750-028467 ABCV0628 MPC 3D 16x 10GE
CPU REV 12 711-029089 ABCK4320 AMPC PMB
PIC 0 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 NON-JNPR S1803164265 SFP+-10G-LR
Xcvr 1 NON-JNPR CI14LR005 SFP+-10G-LR
Xcvr 2 NON-JNPR FT20130307068 SFP+-10G-LR
Xcvr 3 w NON-JNPR SD3J270080 SFP+-10G-LR
PIC 1 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 NON-JNPR EX1611300865 SFP+-10G-LR
Xcvr 1 NON-JNPR FCIB150925109 SFP+-10G-LR
Xcvr 2 NON-JNPR EX1611300866 SFP+-10G-LR
Xcvr 3 NON-JNPR FCIB1709150045 SFP+-10G-LR
PIC 2 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 0 NON-JNPR EX1611300867 SFP+-10G-LR
Xcvr 1 NON-JNPR INDAI0110515 SFP+-10G-LR
Xcvr 3 L NON-JNPR S1803164266 SFP+-10G-LR
PIC 3 BUILTIN BUILTIN 4x 10GE(LAN) SFP+
Xcvr 1 NON-JNPR EXP96L015 SFP+-10G-LR
Xcvr 2 NON-JNPR FCIB20141107109 SFP+-10G-LR
Xcvr 3 NON-JNPR FCIB20141107110 SFP+-10G-LR
Fan Tray Enhanced Left Fan Tray

 

run show configuration chassis

 

redundancy {
routing-engine 0 master;
routing-engine 1 backup;
failover on-loss-of-keepalives;
graceful-switchover;
}
aggregated-devices {
ethernet {
device-count 5;
}
}
fpc 0 {
pic 3 {
tunnel-services {
bandwidth 10g;
}
}
}
network-services enhanced-ip;

 

The logical system is connected with the main via the Logical-tunnel interface

 

run show configuration logical-systems VBR

 

interfaces {
lt-0/3/0 {
unit 102 {
encapsulation ethernet;
peer-unit 103;
family inet {
address 212.212.156.3/31;
}

 

run show configuration interfaces lt-0/3/0

 

unit 103 {
description "-= / BGP / lt-0/3/0.103 / #100M =-";
encapsulation ethernet;
peer-unit 102;
family inet {
policer {
input POLICER;
output POLICER;
}
address 212.212.156.2/31;
}

 

Between the main and logical systems the bgp protocol works .

How to limit the traffic passing through the interface lt-0/3/0.103 ?

I tried to add policer on lt-0/3/0.103 but it does not work .

 

 

 

 

 

1 REPLY 1
Highlighted
Junos

Re: MX480 restriction of traffic through a logical system

‎01-31-2019 02:46 AM

do you have all the CoS and Policer configurations setup for the interface?

 

example:

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/policer-single-rate-two-color-ban...

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Feedback