Hi Beeelzebub,
I see that you have opened a new thread for “Applying service name table to a demux0 interface” I’ll try to check and respond to that.
I didn’t suggest the “service-name-tables” because this is something you need to have before the subscriber logs in. Since your query was more towards draining the existing one in a graceful manner, thought
max-session is more appropriate.
+++++++++++++++++++++++++++++++++++++++++++++
Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
+++++++++++++++++++++++++++++++++++++++++++++
Regards
Arpit
Hi arpitch,
Beeelzebub (Contributor) posted a new reply in Junos on 08-30-2019 12:47 AM:
Re: Multiple access concentrators
Hi arpitch,
Thanks for the max-session statement link, I will probably use something like that.
And I'm aware of the versioning statement, been using this since day one 🙂
I guess my question should have more been towards the configuration of a primary and secundairy pppoe server on my network.
So the secundairy pppoe server would need to send delayed PADO packet responses to clients.
I believe this is done via service name tables, below is my complete config.
ae10 consists out of 2 ethernet interfaces towards two different core devices.
The demux0 and ae10 association is required or otherwise pppoe establishment doesn't work on ae interfaces.
Hoewever, the service name table doesn't seem to do anything. The CPE, without a service-name specified in its pppoe client configuration, does not wait 5 seconds until the pppoe session is established.
pppoe { service-name-tables dynamic-pppoe-table { service empty { delay 5; } } } ae10 { flexible-vlan-tagging; native-vlan-id 1; mtu 9192; aggregated-ether-options { lacp { active; periodic fast; } } unit 0 { encapsulation ppp-over-ether; vlan-id 1; pppoe-underlying-options { service-name-table dynamic-pppoe-table; } } } demux0 { unit 150 { description "EVPN primairy VLAN"; vlan-id 150; demux-options { underlying-interface ae10; } family pppoe { duplicate-protection; dynamic-profile PPPoE-PROFILE-PRIMAIR; } } unit 151 { description "EVPN secundairy VLAN"; vlan-id 151; demux-options { underlying-interface ae10; } family pppoe { duplicate-protection; dynamic-profile PPPoE-PROFILE-SECUNDAIR; } } }