Junos
Junos

SRX100 Web Device Manager how to add firewall filter and policer

‎09-02-2019 06:48 PM

I need to limit the upload/download max bandwidth on specific interface. Then I found the link below.

https://kb.juniper.net/InfoCenter/index?page=content&id=KB28161

I logged in to Web Device Manager but cannot find any configuration for bandwidth limitation. Is this can only configure by CLI?

2 REPLIES 2
Junos
Solution
Accepted by topic author jlotag
‎09-05-2019 07:32 PM

Re: SRX100 Web Device Manager how to add firewall filter and policer

‎09-02-2019 07:25 PM

You may use "Point and Click CLI" option in CLI Tools on J-Web

J-Web -> Cli Tools -> Point and Click CLI -> Firwall -> Policer --Config policer and commit
J-Web -> Cli Tools -> Point and Click CLI -> Firwall -> Filter -- Config filter
J-Web -> Cli Tools -> Point and Click CLI -> Interfaces -- Apply filter

 

 

Thanks,
Nellikka
JNCIE x3 (SEC #321; SP #2839; ENT #790)
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!
Junos

Re: SRX100 Web Device Manager how to add firewall filter and policer

‎09-05-2019 07:31 PM

Thanks Nellikka. But after I checked the checkbox of "If exceeding" then click "Configure". It show me the configutration summary. I expect some place for me to define the max bandwidth. I rather go back to CLI to set the policy and then check the config in Web Device Manager.