You will find static binding configuration at 'host'
root@juniper# set access address-assignment pool b family inet ? Mar 20 02:16:02 Possible completions: <[Enter]> Execute this command + apply-groups Groups from which to inherit configuration data + apply-groups-except Don't inherit configuration data from these groups > dhcp-attributes DHCP options and match criteria > excluded-address Excluded Addresses > excluded-range Excluded address range > host Hostname for static reservations <<<<here network Network address > range Address range > xauth-attributes Configure xauth attributes | Pipe through a command
This should allow you to bind a hardware address to an ip.
Let us know if there are questions.
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!
I know how to bind a hardware address to an ip on the updated Junos. This ist not my question.
My question is: how to override DHCP pool settings for binded address? E.g. set different domain name and DNS for this particular address. Above I have written an example how I used to do it on the old Junos. How to do the same on the new Junos?